MPF 9T07101 AP-20 GEAR PUMP

• APQ-20 is a high pressure hydraulic gear pump with cast iron end caps and an aluminum housing.

• Standard mounting flange is SAE A-2 bolt.

• Standard ports are SAE-12 inlet and SAE-10 outlet. Hang options available. Consult Anfield.

• Optional rear ports available

• Standard drive shaft is 5/8” straight shaft with 5/32” key.

• Optional shafts include an SAE 9 tooth spline and a 3/4” straight shaft with a 3/16” key.

Technical Data

• Filtration: 25 micron or better

• Oil Viscosity: 6 to 200 cSt

• Inlet Pressure: 12 to 32 psi absolute

• Temperature: Oil: -25ºC to 80ºC / -12ºF to 175ºF

Ambient: -22ºC to 55ºC / -8ºF to 130ºF

• Port Sizes: Inlet: SAE-12 (1-1/16”-12 UNF)

Outlet: SAE-10 (7/8”-14 UNF)