MH0141AA02AB0000000000000AA00J
Item #:
101-1078-009
Product Info
130-1175, 130-1175-003, 151-2097, 1512097, ADM250-2SP, ADM2502SP, MG141211AAAB, TB0230AP110AAAB, TB0260AP110AAAA, TB0260AP110AAAB
EATON CORPORATION
Displacement:231 cubic centimetre per revolution
Mounting_Type:2 Bolt Std – 82.50 [3.248] Dia. X 3.05 [.120] Pilot, 13.59 [.535] Dia. Mounting Holes On 106.35 [4.187] Dia. B.C.
Output_Shaft_Type:Spline
Port_Type:.500-14 NPTF Dryseal Pipe Thread Ports
Flow_Rate:57 litre per minute
Maximum_Speed:243 revolutions per minute
Torque:302 newton metre
Two_Speed_Ratio:None
View Accessories
TRX BOLT 225-275INLB (1)
TORX HEAD BOLT
FLANGE; 2 BOLT, STANDARD (1)
H DRIVE 14.1 CI ( 009)
H HSG 1/2 NPT PORTS (15833 002)
H FORGED END CAP
H SEAL KIT BUNA N ( 008; 009) [100]
H SERIES PLATE SPACER (ST)
SHAFT, 1 SPLINED 6T, SAE 6B (1)
THRUST BEARING RACE (1)
THRUST BEARING (1)
H GEROTER 14.1 CID (009) W1.25
