Brand Hydraulics FP Adjustable Proportional Flow Dividers

The Brand, adjustable proportional flow divider comes in three basic models FP53, FP55 and FP56. The FP series receives a single stream of fluid and divides it into two streams. The customer has the ability to adjust one (FP53 or FP55) or both (FP56) outlet flows. The initial flow settings will not fluctuate even though the work being done by one of the streams is much greater than the work being done by the other.

The ratio of the outlet streams remains constant even when the inlet flow increases or decreases.

FP53 – has one fixed orifice, one adjustable orifice and a relief for the outlet port on the side of the valve with the adjustment screw. The FP53 receives a single stream and divides into two steams. With the FP53 it is possible to control the flow out one outlet up to 60% of input. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.

FP55 – has one fixed orifice, one adjustable orifice and free reverse flow for both outlets. The FP55 receives a single stream and divides into two steams. With the FP55 it is possible to control the flow out one outlet up to 60% of input. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.

FP56 – has two adjustable orifices and free reverse flow for both outlets. The FP56 receives a single stream and divides into two steams. With the FP55 it is possible to control the flow out two outlets up to 95% of input, and to vary the pressure drop through the valve. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.