Brand Hydraulics FG Adjustable Constant Volume Priority Flow Dividers

The Brand, adjustable priority flow divider comes in two basic models FG52 and FG54. The FG series receives a single stream of fluid and divides it into two separate output streams. The priority flow is adjustable from 0.2 gpm to 15 gpm with minimal pressure drop. The priority port will maintain the same flow setting even with an increase or decrease in the input flow.

FG52 – is an adjustable priority divider with a ball spring relief for the priority port. The adjustable relief is set to 1500 psi at the factory (standard setting). The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.

FG54 – is an adjustable priority divider with free reverse flow for both outlet ports. Flow can travel in reverse through both outlet ports and is not metered when it travels in reverse. The non-metered flow travels past the poppet, down the center of the valve, past the orifice spool and then through the inlet. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow.