Brand Hydraulics BG Adjustable Priority Flow Dividers

The Brand, non-adjustable priority flow divider comes in three basic models BG5, BGR5 and BGC5. The BG series receive a single stream of fluid and divides it into two separate output streams. The priority port will maintain the same flow even with an increase or decrease in the input flow. The priority port size is 3/8” NPT for 0-8 gpm, 1/2” NPT for 8-16 gpm and 3/4” NPT for 16-30 gpm.

BG5 – is a non-adjustable priority divider that receives a single stream and divides it into a priority stream and an excess stream. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow. The priority flow setting must be specified when ordering.

BGR5 – is very similar to the BG5 in that it is a non-adjustable priority divider, but in addition to the BG5’s features it also provides a ball spring relief valve for the priority port. Adjustable relief is set to 1500 psi at the factory (standard setting). The relief flow dumps to its own drain port. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow. The priority flow setting must be specified when ordering.

BGC5 – is very similar to the BG5 in that it is a non-adjustable priority divider, but in addition to the BG5’s features it also provides free reverse flow for both outlet ports. Flow can travel in reverse through both outlet ports and is not metered as it travels in reverse. The non-metered flow travels past the poppet, down the center of the valve, past the orifice spool and then through the inlet. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow. The priority flow setting must be specified when ordering.