Calculators

Note: This page requires Javascript to function.

DIAMETER of Driven Sprocket

  1. Enter Drive Speed, Drive Sprocket Diameter and Desired Driven Speed
  2. Click to Compute the Driven Sprocket Diameter
Drive Speed(RPM)
Drive Sprocket (Diam)
Driven Speed (RPM)
Driven Sprocket (Diam)

  

SPEED of Driven Sprocket

  1. Enter Drive Speed, Drive Sprocket Diameter and Driven Sprocket Diameter
  2. Click to Compute the Driven Speed
Drive Speed(RPM)
Drive Sprocket (Diam)
Driven Speed (RPM)
Driven Sprocket (Diam)

  

DIAMETER of Drive Sprocket

  1. Enter Drive Speed, Driven Speed and Driven Sprocket Diameter
  2. Click to Compute the Drive Diameter
Drive Speed(RPM)
Drive Sprocket (Diam)
Driven Speed (RPM)
Driven Sprocket (Diam)

  

SPEED of Drive Sprocket

  1. Enter Pulley Center Distance, Large Pulley Diameter and Other Pulley Diameter
  2. Click to Compute the Drive Speed
Drive Speed(RPM)
Drive Sprocket (Diam)
Driven Speed (RPM)
Driven Sprocket (Diam)

  

LENGTH of V-Belt

  1. Enter Pulley Center Distance, Large Pulley Diameter and Other Pulley Diameter
  2. Click to Compute the V-Belt Length
Pulley Center Distance
Large Pulley (Diam)
Other Pulley (Diam)
V-Belt Length

  

PUSH-PULL for a Cylinder

  1. Enter the Cylinder Bore diameter, PSI (pressure) and Rod Diameter
  2. Click to Compute the PUSH / PULL
Cylinder Bore(inch)
PSI
Rod Diameter
Cylinder PUSH (lbs)
Cylinder PULL (lbs)

  

PUSH-PULL for a Cylinder at an Angle

  1. Enter the Cylinder Bore diameter, PSI (pressure), Rod Diameter and Angle.
  2. Click to Compute the PUSH / PULL
Cylinder Bore(inch)
PSI
Rod Diameter
Angle (degrees)
Cylinder PUSH (lbs)
Cylinder PULL (lbs)

  

Speed of a Cylinder

  1. Enter the Pump GPM, Cylinder Bore diameter, Stroke and Rod Diameter. Use decimal (not fractions) if necessary..
  2. Click to Compute the CYLINDER SPEED
Pump GPM
Cylinder Bore(inch)
Stroke (inch)
Rod Diameter
Extend speed (inch/sec)
Retract speed (inch/sec)
Extend Time (seconds)
Retract Time (seconds)
Cycle Time (seconds)

  

DISPLACEMENT for Gear Pump

  1. Enter measurements of internal gear pump parts (in inches)
  2. Click to Compute the GPM @ 1200 RPM
Gear O.D.
Center dist. of gears
Gear Width
GPM @ 1200 RPM

  

HORSEPOWER output

  1. Enter the GPM and PSI (pressure)
  2. Click to Compute the HORSEPOWER
GPM
PSI
Assume motor efficiency %
Horsepower

  

Rectangular RESERVOIR CAPACITY

  1. Enter the Reservoir Length, Width and Height (inches)
  2. Click to Compute the cubic inches/Gallons
Length (inch)
Width (inch)
Height (inch)
Reservoir Capacity (cubic inches)
Reservoir Capacity (gallons)

  

Cylindrical RESERVOIR CAPACITY

  1. Enter the Reservoir DIAMETER (inches) and Reservoir LENGTH or HEIGHT(inches)
  2. Click to Compute the cubic inches/Gallons
Reservoir Diameter (inch)
Length or Height (inch)
Reservoir Capacity (cubic inches)
Reservoir Capacity (gallons)

  

VEHICLE SPEED

  1. Enter the Wheel OD diameter (not rim size) and axle RPM
  2. Click to Compute the SPEED
Wheel OD (inch)
Axle (RPM)
Vehicle Speed ( feet/min )
Vehicle Speed ( MPH )